 |
|
| ENGINE |
| Make/Model/Fuel Type |
Cummins/B5.9-C/Diesel |
| Type |
4-cycle, watercooled, direct injection with turbocharger |
| Net flywheel horsepower |
134HP/2400 RPM |
| Maximum torque |
383 ft/lb /1400 RPM |
| Number of cylinders |
6 |
| Bore and stroke |
4.02" x 4.72" (102 mm x 120 mm) |
| Total displacement |
359 in3 (5883 cm3) |
| Alternator |
DC24V -1200w (50amp) |
| Starting motor |
24V - 4.5kw (6HP) |
| Battery |
12V - 110AH, 2 units |
| Governor |
All-speed, mechanical type |
|
| TORQUE CONVERTER AND TRANSMISSION |
| Torque converter |
3 elements, single stage |
| Torque stall ratio |
3.15:1 |
| Main clutches |
Wet hydraulic, multi-disk type |
| Cooling method |
Forced circulation type |
| Transmission |
Full power shift, 4 forward, 4 reverse with automatic mode (2nd-4th with
downshift switch for 2nd-1st downshifting) |
| Forward & reverse (maximum speed) |
1st: 5.0 MPH (8.0 km/hr)
2nd: 8.0 MPH (13.0 km/hr)
3rd: 12.5 MPH (20.0 km/hr)
4th: 23.1 MPH (37.0 km/hr) |
|
| SERVICE REFILL CAPACITY |
| LOCATION |
Capacity: Gallons
|
Capacity: Liters
|
| Engine (coolant) |
11.0
|
(42.2)
|
| Fuel tank (diesel fuel) |
47.60
|
(175.0)
|
| Engine oil (oil plan) |
3.75
|
(14.2)
|
| Front axle (gear oil) |
6.60
|
(20.0)
|
| Rear axle (gear oil) |
6.60
|
(20.0)
|
| Steering box |
0.10
|
(0.4)
|
| Torque convertor and transmission (engine oil) |
7.90
|
(30.0)
|
| Hydraulic system including tank (hydraulic oil) |
26.4
|
(100.0)
|
| Brake oil tank (engine oil) |
0.4
|
(1.5)
|
|
|
|
| HYDRAULIC AND STEERING SYSTEM |
| Steering type |
Articulated frame steering |
| Steering mechanism |
Hydraulic power steering unit, mechanical follow-up |
| Lift (boom) cylinder |
Two (2) double-acting piston type: 4.7" x 28" (120 mm x 713 mm) |
| Tilt (bucket) cylinder |
One (1) double-acting piston type: 5.3" x 29.75" (110 mm x 756
mm) |
| Steering cylinder |
Two (2) double-acting piston type: 2.5" x 14.7" (65 mm x 374 mm) |
| Steering oil pump |
Gear type: 26.2 GPM/1000psi @ 2350 RPM
(99 LPM/70 kg/cm2 @ 2350 RPM) |
| Main oil pump |
Gear type: 16.1 GPM/1000 psi @ 2350 RPM
(61 LPM/70 kg/cm2 @ 2350 RPM) |
| Relief valve set pressure |
Loading |
2770 psi (195 kg/cm2) |
| Steering |
3000 psi (210 kg/cm2) |
| HYDRAULIC CYCLE TIME* |
| Lifting time (at full load) |
5.8 sec. |
| Lowering time (empty) |
2.9 sec. |
| Bucket dumping time |
2.2 sec. |
| TOTAL |
10.9 sec. |
Measured in accordance with SAE J732C
|
| AXLE SYSTEM |
| Drive system |
4-wheel drive |
| Front and rear axle |
Semi-floating type |
| Tires |
Standard |
20.5 x 25-12PR (L-2) |
| Optional |
17.5 x 25-12PR (L-3)
20.5 x 25-12PR (L-3) |
| Reduction and differential gear |
Spiral bevel/gear, 1 stage reduction, torque proportioning type |
| Final reduction gear |
Internal planetary gear (5.625:1) inboard mounted |
| Oscillation angle |
±12° (total ±24°) |
|
| BRAKE SYSTEM |
| Service brakes |
4-wheel enclosed wet disk brakes, dual circuit |
| Parking/Emergency brake |
Spring applied air released type, located on drive shaft. Meets MSHA requirements. |
|
|
