Home
 
 Site Search 
 Sitemap :: Contact Us :: Dealer Login 
Printer Friendy Version [ HTML ] PDF ] 
Download [ ZIP ] 
 
 
   
Specifications: 
ENGINE
Make/Model/Fuel Type Cummins M11-C
Type 4-cycle, watercooled, turbocharged, direct injection
Net flywheel horsepower 226 HP/2100 RPM
Maximum torque 723 ft/lb @ 1300 RPM
Number of cylinders 6
Bore and stroke 4.92" x 5.79" (114 mm x 147 mm)
Total displacement 660 in3 (10,817 cm3)
Alternator AC24V-1800W (75 amp)
Starting motor 24V-7.3kw (9.8HP)
Battery 12V-150AH, 2 units
Governor All-speed, mechanical type
TORQUE CONVERTER AND TRANSMISSION
Torque converter 3 elements, single stage
Torque stall ratio 3.32:1
Main clutches Wet hydraulic, multi-disk type
Cooling method Forced circulation type
Transmission Full powershift, 4 forward, 4 reverse with automatic mode (2nd-4th) with downshift
switch for 2nd-1st downshifting
Speeds Forward 1st: 4.6 MPH (7.4 km/hr)
2nd: 7.6 MPH (12.3 km/hr)
3rd: 13.0 MPH (20.9 km/hr)
4th: 21.1 MPH (34.0 km/hr)
Speeds Reverse 1st: 4.7 MPH (7.6 km/hr)
2nd: 7.9 MPH (12.7 km/hr)
3rd: 13.4 MPH (21.5 km/hr)
4th: 21.6 MPH (34.7 km/hr)
SERVICE REFILL CAPACITY
LOCATION

Capacity: Gallons

Capacity: Liters

Engine (coolant)

14.8

(56)

Fuel tank (diesel fuel)

79.3

(300)

Engine (oil pan)

9.7

(37)

Front axle (gear oil)

19.8

(75)

Rear axle (gear oil)

21.1

(80)

Steering Box

0.1

(0.4)

Torque convertor and transmiss (engine oil)

14.0

(53)

Hydraulic system including tank (hydraulic oil)

55.5

(210)

Brake oil tank (engine oil)

0.7

(2.5)

HYDRAULIC AND STEERING SYSTEM
Steering type Articulated frame steering
Steering mechanism Hydraulic power steering unit, mechanical follow-up
Lift (boom) cylinder Two (2) double-acting piston type: 6.3" x 32.0" (160 mm x 814 mm)
Tilt (bucket) cylinder One (1) double-acting piston type: 7.5" x 21.2" (190 mm x 538 mm)
Steering cylinder Two (2) double-acting piston type: 3.54" x 17.3" (90 mm x 440 mm)
Steering oil pump Gear type: 57.3 GPM/1000 psi @ 2100 RPM (217 LPM/70kg/cm2 @ 2100 RPM)
Main oil pump Gear type: 21.1 GPM/1000 psi @ 2100 RPM (80 LPM/70kg/cm2 @ 2100 RPM)
Pilot oil pump Gear type: 13.5 GPM/1000 psi @ 2100 RPM (51 LPM/70kg/cm2 @ 2100 RPM)
Relief valve set pressure Loading 3000 psi (210 kg/cm2)
Steering 3000 psi (210 kg/cm2)
HYDRAULIC CYCLE TIME*
Lifting time (at full load) 6.3 sec.
Lowering time (empty) 3.5 sec.
Bucket dumping time 1.4 sec.
TOTAL 11.2 sec.
*Measured in accordance with SAE J732C
AXLE SYSTEM
Drive system 4-wheel drive
Front and rear axle Full floating banjo type
Tires Standard 26.5 x 25-20PR (L-3)
Optional 23.5 x 25-16PR (L-2)(L-4)(L-5)(L-3)
26.5 x 25-20PR (L-2)(L-4)(L-5)
Reduction and differential gear Spiral bevel gear, 1 stage reduction, torque proportioning type
Final reduction gear Outboard mounted, internal planetary gear
Oscillation angle ±11° (total 22°)
BRAKE SYSTEM
Service brakes 4 wheel air over hydraulic wet disk brakes, dual circuit
Parking/Emergency brake Spring applied air release type, located in front driveline. Meets MSHA requirements